Menu System
The menu system is accessed using the two-line display,
and
SELECT
and
SET
knobs on the front of the chassis.
Menu Navigation
The menu system allows you to access all of the setup
and configuration information on the AirCleaner
®
. When
navigating the menus, the
SELECT
knob is used to select
the menu item you want to adjust. This is typically on
the top line of the display. The
SET
knob is used to
adjust the value of the menu item and it typically on the
bottom line of the display.
Note:
Changes made on the Main Menu are applied
immediately but changes made on the Options Menu are only
applied after they are saved. Keep this in mind when using
AirCleaner
®
during a live production.
Tip:
For long lists you can press and hold the SELECT knob
and use the SET knob to jump through the list quickly. Release
the SELECT knob and use the SET knob for normal operation
again.
Menu Trees
The menu system consists of three main branches (
Main
Menu
,
Options Menu
,
User Memory Menu
), each
allowing quick access to specific areas of system
configuration or control. When you exit the
Options
Menu
or
User Memory Menu
you are taken back to the
first item on the
Main Menu
.
Menu Lock
You can lock the menu system to prevent the accidental
selection or change of parameters using the knobs. The
menu lock only turns off the functionality of the knobs
and does not prevent changes from other menu interfaces.
To Lock/Unlock the Menu System
The procedure to lock or unlock the menu system is the
same.
Use the
SELECT
knob to select
Menu Lock Now
and
press the
SET
knob.
Tip:
You can also press the SELECT and SET knobs at the
same time.
To Turn the Menu Auto-lock On
1.
From the
Main Menu
, use the
SELECT
knob to
select
Options Menu
and press the
SET
knob.
2.
Use the
SELECT
knob to select
Menu Lockout
.
3.
Use the
SET
knob to turn the auto-lock on and set
the sleep time.
•
OFF
— the menu will not lock automatically.
•
XX Seconds
— the menu will lock
automatically after the set amount of time. (10
to 60 Seconds)
4.
Use the
SELECT
knob to select
Save Changes
and press the
SET
knob to select
OK
.
Abekas AirCleaner User Manual (v3.5) — Menu System •
11