Ross 4500DR-204-03, User Manual

Page: 35 / 70

ACO-4500 User Guide (v3.0) Front Panel Menu System • 35
Front Panel Menu System
The ACO-4500 provides the user with a menu interface on the chassis to control the functions and options of the
unit.
Navigating the Panel Menu System
The menus can always be viewed on the front panel LCD display, and optionally “in-vision” in an
on-screen-display (OSD) viewable on any pattern output. By default, the OSD is set On for each pattern output, but
can be independently disabled if desired.
The menus are accessed from the initial start-up (Time) screen by pressing the rotary control. To return to the Time
screen, press the blue escape/back button. If you repeatedly press the blue button, the LCD display will cycle
between the display of time and the display of logo.
The Logo menu reports the Device Name, IP Address (when connected), and the Software version number.
Figure 7.1 Example of the Logo Screen
This menu also gives you access to the key menus that are used to control and configure the ACO-4500: Signal
Strength, the Channel Setup, and the System Setup menus.
Menu Trees
Figure 7.2 is a basic menu tree structure of the ACO-4500.
Figure 7.2 ACO-4500 — Menu Tree (Diagrammatic)
Audio Type Audio = ###.###.###.###
ACO-4500
v##
Signal Strength Screen
Channel Setup Menu
Logo Screen
Temp Report
Event Report
System Report
DashBoard
Calibration
Configuration
Network
T R
System Setup Menu