Ross 4500DR-104-07, User Manual, Page: 43 / 161

SRG-4500 User Guide (v7.0) Front Panel Menu System • 43
Front Panel Menu System
The SRG-4500 provides the user with a menu interface on the chassis to control the functions and options of the
unit. The menus can always be viewed on the front panel LCD display, and optionally “in-vision” in an
“on-screen-display” (OSD) viewable on any pattern output. By default, the OSD is set On for each pattern output,
but can be independently disabled if desired.
Navigating the Panel Menu System
The menus are accessed from the initial start-up (Time) screen by pressing the rotary control. To return to the Time
screen, press the blue escape/back button. If you repeatedly press the blue button, the LCD display will cycle
between the display of time and the display of the Ross logo.
In this display of time, the additional status information is:
• Device Name
• GPS/NTP Status
• Current Date
• Current Time
• SRG-4500 IP Address (when connected)
• Lock Status
• Software version number
Figure 7.1 Example of the Time Display
In this display of the Ross logo, the additional information is:
• Time
• GPS/NTP Status
• Ross logo
• SRG-4500 IP Address (when connected)
• Lock Status
• Software version number
Figure 7.2 Example of the Ross Logo Display
For both of these screens, the top and bottom lines are animated, cycling between the information detailed above.
Immediately after re-connection of the Ethernet cable, or a video reference, the respective line may appear
momentarily as: “
Ethernet...negotiating
” or “
Genlocking............
”
By pressing the rotary control from either of the above screens, you access the top level menu. This menu gives you
access to the five key menus that are used to control and configure the SRG-4500:
Locked to Video v##
Locked to Video v##