Ross 4500DR-104-07, User Manual, Page: 32 / 161

32 • Functional Check Procedures SRG-4500 User Guide (v7.0)
1. Select < -Video >.
2. Select < Video Channel 01 = SDI+Black 1 >.
3. Connect the SDI1 Pattern output to the Serial Digital Video Analyzer using a 75ohm BNC cable.
4. Set the Serial Digital Video Analyzer to view the Serial Digital Video signal.
5. Check that the Serial Digital Video Analyzer displays the appropriate Serial Digital Video signal. If available,
check the status of the Serial Digital Video signal on the Analyzer by setting it to display the relevant data.
6. Check that the Serial Digital Video signal is as configured in the menu, and that selecting and editing entries in
the menu by using the rotary/push control, the configuration of the Serial Digital Video signal changes
accordingly.
7. Move the 75ohm BNC cable to the SDI1 Black output.
8. Repeat steps 4 - 6 to confirm the configuration of the SDI1 Black output.
9. Return to step 2, set for < Video Channel 02 = SDI+Black 2 >, and repeat steps to check both of the SDI2
outputs.
10. Return to the Top Level menu using the [Back] button.
SDI Embedded Audio Settings
Audio channels on the SDI outputs are arranged as 8 stereo pairs on each video output:
• SDI 1 Pattern 01 … 16
• SDI 1 Black 01 … 16
• SDI 2 Pattern 01 … 16
• SDI 2 Black 01 … 16.
From the Top Level menu:
1. Select < -Audio >.
2. Select < SDI 1 Pattern Left = Audio 01 >.
3. Connect the SDI1 Pattern video output to the Serial Digital Video Analyzer or to a Digital Audio De-Embedder
using a 75ohm BNC cable.
4. Set the Analyzer / De-Embedder to display the status of the audio data, and to receive a signal through the
connected input.
5. Check that the Analyzer / De-Embedder does not report any data errors, etc.
6. Check that the Digital Audio signal is as configured in the menu, and that selecting and editing entries in the
menu by using the rotary/push control, the configuration of the Digital Audio signal changes accordingly.
7. Repeat steps 3 - 6 for menu selection:
< SDI 1 Pattern Right = Audio 02 > on SDI1 Pattern video output.
8. Repeat steps 3 - 6 for menu selections:
< SDI 1 Pattern Left / Right = Audio 03….16 > on SDI1 Pattern video output.
9. Repeat steps 3 - 6 for menu selections:
< SDI 1 Black Left / Right = Audio 01….16 > on SDI1 Black output.
10. Repeat steps 3 - 6 for menu selections:
< SDI 2 Pattern Left / Right = Audio 01….16 > on SDI2 Pattern video output.
11. Repeat steps 3 - 6 for menu selections:
< SDI 2 Black Left / Right = Audio 01….16 > on SDI2 Black output.