RosRoca Olympus Mini, Service Manual

Page: 9 / 110

1 Introduction
This manual identifies all the recommended
preventative maintenance service procedures and
inspections to be carried out on Olympus Mini refuse
collection bodies.
1.1 Safety precautions
wARNING:
IT IS THe ReSPONSIBILITY OF THe
TeCHNICIAN TO COMPLY wITH ALL THe
ReLeVANT SAFeTY PReCAuTIONS ANd
PROCeduReS LISTed IN CHAPTeR 2
‘HeALTH ANd SAFeTY’ OF THIS MANuAL
AS weLL AS ALL PReVAILING SAFe
SYSTeMS OF wORK, HeALTH ANd SAFeTY
ReGuLATIONS, wORKSHOP ReGuLATIONS
ANd wORKSHOP COdeS OF PRACTICe
wHeN CARRYING OuT THe PROCeduReS
deSCRIBed IN THIS MANuAL.
1.2 Immobilising the vehicle prior
to service procedures
Before commencing any service procedure, the refuse
collection vehicle must be immobilised as follows:
1. Stand the vehicle on clean, level and stable ground.
2. Engage the parking brakes.
3. Select Neutral ‘N’.
4. Stop the engine.
5. Chock the wheels.
6. Check that the tailgate is in the normal lowered
position, locked to the body.
7. Turn the ‘Body main’ switch to ‘off’ position.
Remove and retain the key.
8. Switch ignition ‘off’. Remove and retain the key.
9. Secure a sign reading ‘DO NOT START OR
OPERATE VEHICLE’ to the steering wheel.
10. Lock all cab doors. Remove and retain the keys.
11. If necessary isolate or disconnect the battery.
(Refer to chassis‑cab manufacturer’s service
information for procedures).
INTROduCTION
1‑3
OM1R-SM-GB01R
1