RosRoca Olympus Mini, Service Manual

Page: 57 / 110

4 Hydraulic system oil level
It is most important that the level of fluid in the
hydraulic reservoir is maintained within the specified
limits.
Topping up of the oil must be conducted in a
controlled workshop environment using a pressurised
filling system connected to a quick release coupling
on the system. Operator’s without a bulk oil delivery
system are supplied with an optional hand pump and
hoses.
It is most important that the hydraulic system is
maintained according to Ros Roca S.A. Maintenance
Schedule and associated instructions.
System maintenance and filter element change
requirements are specified in Chapter 6 ‘Scheduled
maintenance’ of this Manual.
4.1 To check hydraulic system oil level
wARNING:
THe BOdY MuST Be eMPTY wHeN
CHeCKING THe HYdRAuLIC SYSTeM OIL
LeVeL.
The level is checked with:
• Tailgate fully lowered (cylinders closed).
• The ejection plate fully ejected to the rear of
the body (cylinder open).
• The compaction mechanism packer plate
is open and carriage plate is fully lowered
(cylinders closed).
This is shown on the label adjacent to the hydraulic oil
level gauge.
Hydraulic Oil
ONLY USE CLEAN OIL OF THE
CORRECT SPECIFICATION
Max.
4676-OM1-R-GB-G1
Procedure
1. Stand the vehicle on clean, level and stable ground
with sufficient clearance to allow for the tailgate to
be fully raised.
2. Engage the parking brakes.
3. Select Neutral ‘N’.
4. Check that the tailgate is in the normal position
locked to the body.
5. Make sure that all personnel are clear of the body,
tailgate and rear of the vehicle.
HYdRAuLIC SYSTeM OIL LeVeL
4‑3
OM1R-SM-GB01R
4