5
5‑5
CLEANING
OL1D-SM-GB02D
5.2
Daily cleaning
1. Stand the vehicle on clean, level and stable ground
with sufficient clearance to allow for the tailgates
to be fully raised.
2. Engage the parking brakes.
3. Select Neutral ‘N’.
4. Turn the ‘Body main’ switch to the OFF position.
Remove and retain the key.
5. Switch ignition off. Remove and retain the key.
6. Secure a sign ‘DO NOT START or OPERATE
VEHICLE’ to the steering wheel.
7. Lock all cab doors. Remove and retain the keys.
8. Inspect the tailgate hopper and remove any refuse.
9. Open the tailgate drains (see ‘5.1.2 Tailgate drains’
10. Open the body drain (see ‘5.1.1 Body drain’ on page
5‑4).
11. Lower the access ladder (if fitted) on right‑hand
side of vehicle.
OL1SMGB01-142
12. Open the body access door. The door has a safety
interlock to stop operation of the body mechanism
when it is open.
13. Clean out any refuse which has entered the body in
front of the ejection plate.
14. Clean debris from the body sump and wash out
thoroughly. Drain through the external hose to
ensure thorough cleaning is achieved.
15. Close and lock the body access door.
16. Securely stow the access ladder (if fitted).
17. Close the tailgate drains (see ‘5.1.2 Tailgate drains’
18. Close the body drain (see ‘5.1.1 Body drain’ on page
5‑4).
19. Make sure that there is no refuse, paper or
flammable materials near the engine or exhaust.
These could cause a fire when the engine is
started. If necessary, tilt the cab (see Chassis‑cab
Manufacturer’s Operator’s Handbook) to make a
thorough inspection.
Summary of Contents for Dennis Eagle Olympus
