RosRoca Dennis Eagle Olympus, Service Manual

Page: 4 / 104

ii
FOREWORD
OL1D-SM-GB02D
Description
The Olympus refuse collection bodywork is a rear
loaded, fixed refuse collection bodywork manufactured
to EN 1501‑1.
Intended use
The Olympus refuse collection bodywork shall
be mounted on chassis‑cabs specified for refuse
collection application and shall be used to collect and
transport domestic and industrial waste and recyclable
materials.
The Olympus refuse collection bodywork is not
designed for:
• operation in severe conditions, e.g. extreme
environmental conditions such as:
• below – 25 °C and above + 40 °C temperatures;
• operation in a tropical environment;
• operation in wind velocity in excess of 75 km/h;
• operation in a contaminating environment;
• operation in a corrosive environment;
• operation in potentially explosive atmospheres;
• handling of loads the nature of which could lead
to dangerous situations (e.g. hot wastes, acids and
bases, radioactive materials, contaminated waste,
especially fragile loads, explosives);
• operation on ships.
Manufacturer’s name and address
Dennis Eagle Ltd.
Heathcote Way
Heathcote Industrial Estate
Warwick
CV34 6TE
United Kingdom.
Dennis Eagle Ltd. (The Company) reserves the right to
change the specification, design, material, procedure,
and dimensions of the equipment described herein
without prior notice at any time in the future, in
accordance with the Company’s constant product
improvement policy.
Dennis Eagle Ltd. has made every reasonable effort
to ensure the accuracy of the Company publications,
but nothing shown, described or referred to in the
publications should be regarded as an infallible guide
to the procedures, materials, specification, design
of availability of any particular vehicle, nor does this
publication constitute an offer for sale of any particular
vehicle. No liability can be accepted by the company
for any mechanical or electrical malfunction, damage,
loss injury or death caused by the use of incorrect
or misrepresented information, omissions or errors
that may have arisen during the preparation of this
publication.
© 2013 Dennis Eagle Ltd.
ALL RIGHTS RESERVED.
Compiled and Published by:
Technical Support Group
Dennis Eagle Ltd.
Heathcote Way
Heathcote Industrial Estate
Warwick
CV34 6TE
United Kingdom
Telephone:
+44 (0)1926 316000
Facsimile: +44 (0)1926 316550
www.dennis‑eagle.com
No part of this publication may be reproduced, stored
in a retrieval system or transmitted in any form without
the prior permission of the Company.
Publication Record
Publication record
Publication
reference
Publication date Comments
This edition OL1D-SM-GB02D June 2013 New edition for new cab control panel.
Original instructions.
Previous editions OL1SMGB01D February 2010 First edition