RosRoca Dennis Eagle Olympus, Service Manual, Page: 37 / 104

3
3‑13
DAILY CHECKS
OL1D-SM-GB02D
For each compaction mechanism control panel, carry
out the following operations (53 - 57):
53. Check that pack cycle operates correctly according
to variant.
Vehicles fitted with a closed waste container
lifting device.
Vehicles fitted with an open waste container
lifting device and guide plate in raised position.
Vehicles fitted with an open waste container
lifting device and a fixed extended rave rail
.
Energise each ‘Start pack cycle’ push‑button in
turn and then press and release the ‘Start pack
cycle’ push‑button.
2774-OL1-D-GB-G1
• Green LED below push‑button should be
illuminated.
• Compaction mechanism packer plate should
open (1), carriage plate and packer plate should
move downwards (2), packer plate should close
(3), carriage plate and packer plate should
move upwards (4) and automatically stop in
the packed position.
2871-OL1-D-GB-G1
1
3 2
4
49. Press and release the return switch.
2748-DS003-OL1-D-GB-G2
Hyd Oil Temp 32
o
C
01.06.2013 09:00:00
0 No errors
0 No errors
0 No errors
2748-DS004-OL1-D-GB-G2
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
32
o
C
01.06.2013 09:00:00
Hyd_Oil_Pressure 2 Bar
2748-DS030-OL1-D-GB-G2
• The screen should display the ‘Body system
run’ mode and ’System on’ pictogram.
WARNINGS:
DRIVER MUST BE IN CAB.
PARKING BRAKE MUST BE APPLIED.
ALL PERSONNEL MUST BE CLEAR OF
FRONT AND REAR OF VEHICLE.
50. Select Drive in the cab.
51. Press ‘Start pack cycle’ push‑button on
compaction mechanism control panel.
2776-OL1-D-GB-G1
• Compaction mechanism should not operate.
52. Select Neutral.