3
3‑10
DAILY CHECKS
OL1D-SM-GB02D
41. Press the two push‑buttons on the ‘Tailgate
lowering’ control panel simultaneously.
• Tailgate should lower smoothly without judder.
2850-OL1-D-GB-G1
• ‘Vehicle reversing’ alarm should sound.
• The engine speed should lower to tick‑over.
42. While tailgate is lowering, release one of the push‑
buttons but keep the other push‑button depressed.
2852-OL1-D-GB-G1
• Tailgate should stop lowering immediately the
push‑button is released.
• Tailgate should not lower.
• ‘Tailgate out‑of‑locks’ pictogram should display
on the control panel screen.
• ‘Vehicle reversing’ alarm should silence.
43. While keeping the push‑button depressed, press
the released push‑button again.
• Tailgate should remain stationary.
• ‘Tailgate out‑of‑locks’ pictogram should
continue to display on the control panel screen.
Release both push‑buttons.
39. Press the eject switch. Release the switch when the
ejection plate has reached the end of its travel.
2847-OL1-D-GB-G2
0
No errors
0
No errors
0
No errors
Hyd Oil Temp
0
No errors
0
No errors
32
o
C
01.06.2013 09:00:00
Hyd_Oil_Pressure
60 Bar
2
WARNING:
MAKE SURE THAT THE TAILGATE AREA IS
CLEAR OF PERSONNEL.
40. Press each of the two push‑buttons on the ‘Tailgate
lowering’ control panel separately.
2450-OT1-D-GB-G1
• Tailgate should not lower.
Summary of Contents for Dennis Eagle Olympus
