3. The Timer function
Starting Timer 1
To switch from the clock to the timer function, turn the setting dial clockwise.
The timer mode will be activated and the display will change to 00M:00S.
Note:
When the timer is in operation the display shows minutes and seconds. If the set time span exceeds
one hour, the display will change to hours and minutes. The corresponding indicators will appear in
the display (see page 5).
If you want to set a time span that exceeds one hour, the minutes and seconds can be set separately.
To do this press the set button for three seconds while in the timer mode (00M:00S). The hour dis-
play will begin to fl ash and can be set using the setting dial. Confi rm the change by pressing the set
button. The timer will then switch to the minutes setting function. Once confi rmed the timer will start
- maximum time span is 9 hours 59 minutes.
Bedien_MultiTimer.indd 24
Bedien_MultiTimer.indd 24
04.02.2010 9:30:38 Uhr
04.02.2010 9:30:38 Uhr