User manual
RHTB-13001
TV mounts
RHTB-13001
TV mounts
User manual
Warning
Safety measures must be practiced at all times during
the installation of this product. Use proper safety gear
and tools for the installation procedure to prevent
personal injury.
Prior to the installation of this product, the installation
instructions should be read and completely
understood. The installation instructions must be read
to prevent personal injury and property damage. Keep
these installation instructions in an easily accessible
location for future reference.
A secure structure must support the weight or load
of the display, When mounting to a wall that
contains wooden studs, dead center of the
wooden stud must be confirmed prior to
installation.
Do not install on a structure that is prone to
vibration, movement or chance of impact.
Failure to do so could result in damage to the
display and/or damage to the mounting surface.
Do not install near heater, fireplace, direct
sunlight, air conditioning or any other source of
direct heat energy. Failure to do so may result in
damage to the display and could increase the risk
of fire.
At least two qualified people should perform the
installation procedure. Injury and/or damage can
result from dropping or mishandling the display.
Recommended mounting surfaces: wooden
studs and solid-flat concrete. If the mount is to be
installed on any surface other than wooden
studs, use suitable hardware (which is
commercially available).
The wall structure must be capable of supporting at
least a maximum weight of37kg (80lbs) for 23”-37”
televisions. If not, the wall must be reinforced. Proper
installation procedure by a qualified service
technician, as outlined in the installation instructions,
must be adhered to. Failure to do so could result in
serious personal injury, or even death.
WARNING STATEMENTS
TOOLS REQUIRED NOT INCLUDED
PARTS INCLUDED
Φ
8x40 (x3)
M6x50 (x3)
A
B
C
D
E
M6x12 (x4)
M6x30 (x4)
M8x16 (x4)
18X8X20 (x4)
M4x12 (x4)
M4x30 (x4)
Φ
15x5.5x1.2(x4)
(x1)
?
