Popcorn Maker
RHPM-14001
User Manual
2
Power Cord
Center Knob
Bowl Cap
Cover/Serving Bowl
Popping Surface
Stirring Rod
Center Post
Base
On/Off Switch
Polarized Plug
USING YOUR POPCORN MAKER
Technical Data
A short power-supply cord is provided to reduce the hazards resulting from entanglement or tripping over a long
cord. An extension cord may be used with care; however, be sure the marked electrical rating is equal to or greater
than the rating of this appliance. The extension cord should be positioned such that it does not drape over the
counter or tabletop where it can be pulled on by children or tripped over. The electrical rating of this appliance is
listed on the bottom panel of the unit.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a
polarized outlet only one way. If the plug does not fit into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.
Operating voltage
110V ~ 60Hz
Power consumption
750-850W
1. Place your popcorn maker on a flat, level surface, such as a table or countertop. Be sure the unit is unplugged.
2. Remove the cover/serving bowl from the popcorn maker. Pour cooking oil onto the popping surface.
We recommend using vegetable oil or canola oil however any type of cooking oil is suitable. Add the corn
kernels onto the popping surface. (Refer to the chart below for recommended oil and kernel measurements).
