2
Turning The System On/Off
Vehicle ignition must be On or in ACC Mode to
operate system.
Press the DISP button on the panel to dim
backlight of the display or turn display off.
Your system will automatically default to the last screen you were on prior to turning off the unit.
The Information Bar is located at the
top of the screen. Depending on the
source, it will provide information or content
sensitive controls
This will take you to the Settings
Menu for advanced control settings.
The Source Tabs located at the bottom of
the screen will give you direct access to
common sources.
When the vehicle is turned off, the unit will
automatically turn off.
Basic Functions
Screen Organization
NOTE:
Most functions on the Rosen unit are controlled by either SYNC or
the Factory buttons. Please refer to your Factory Owner’s Manual for all
other instructions.
