EN
54
5.5 First use of the e-bike system
The bike is supplied with a partially charged battery. Before using it for the first time, this battery must be charged for at
least 1h via the USB port (see “5.1 Information on the e-bike system”) or via the e-bike system.
Fit the on-board computer in the holder and proceed as follows while the bike is standing:
Go to the status page (use the „
<
“ button on the control unit to get to the first display) and call up <Settings> with the
select button (1).
Select and display the assistance level by pressing the “
–
” and “
+
”
buttons and open the setting and any further submenus with the
select button (1).
You can use the “
<
” button to go back to the previous menu from
any settings menu.
This manual only describes the basic features of the e-bike system.
For information on further settings and functions, please see the
enclosed manual of the manufacturer.
5.6 Setting the assistance level
You can set the level of e-bike pedal assistance by using the buttons
“
+
” or “
–
” on the control unit. You may change the assistance level
at any time, even while riding.
To increase the assistance level, press the “
+
” button on the control
unit until the desired assistance level is shown on the on-board
computer display. To reduce the assistance level, press the “
–
”
button.
You can choose between the following assistance levels:
• “
OFF
“: The motor assistance is switched off, the e-bike can be
pedalled as a regular bicycle. While using this assistance level,
you cannot switch on the walk assistance function.
• “
ECO
”: Effective assistance at maximum efficiency for maximum range.
• “
TOUR
”: Constant assistance, for long tours.
• “
SPORT
”: Powerful assistance for sporty off-road riding, as well as for urban traffic.
• “
TURBO
“: Maximum assistance for high cadence, for sporty riding.
<
>
1
+
–