35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
Parts
SuperSnap™
Instruction Sheet
Instructions for assembly
Incept-11.05.01
The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #01INSSuperSnapCableBall
Finished Look
SuperSnap
12S300
End Caps
Figure 2
Figure 5
Figure 1
Step 1
Snap the SuperSnap open and insert
poster (top and bottom).
Fig. 1
Note:
It is easier to open and close
the SuperSnap by starting at one
end and working your way down
the holder.
Step 2
To close, snap the SuperSnap shut.
Fig. 2
Step 3
Insert ball into top rail of the holder.
Fig. 3
Note: It is easiest to slide the ball
into the holder if you hold the cable
as close to the ball as possible.
Fig. 4
Step 4
Push end caps into place.
Fig 5
Step 5
Suspend Poster.
Finished Look
Important note:
Please save and reuse the
SuperSnap, End Caps, and Cable and
Ball for future projects.
Cable and Ball
16-0018P
Figure 4
Figure 3
