Parts
Instructions for Hanging
Instruction Sheet
Step 1
For use with poster paper or thinner
substrates. Score and fold or staple poster
edge and slide into the QuickGrip Holder.
When using staples, place staples 1/4” from
top and bottom edges of poster.
Fig. 1
or
For use with thicker graphics up to 2mm.
Starting at one corner push the QuickGrip
Holder onto the graphic. Work your way
down the holder tapping it firmly down to
seat the graphic fully.
Fig. 2
Step 3
Slide window mounts into the top rail of the
QuickGrip holder.
Fig. 3
Place one window mount about 1/3 from each
edge of the holder.
Step 4
Push end caps into place.
Fig. 5
Step 5
Suspend poster.
Fig. 6
Important note:
Please save and reuse the QuickGrip Holder,
End Caps and Window Mounts for future
projects.
End Caps
06-5525
QuickGrip™
Incept-12.31.02
QuickGrip is a trademark of Rose Displays, Ltd. Neither the manufacturer
nor any sales agent may be held liable for injury, loss or damage resulting
from the use of these products. Part #02QuickGripWindowMounts
QuickGrip
12-0500
Figure 5
Figure 4
Figure 3
Figure 2
Figure 1
Window
Mounts
20-0038
35 Congress Street, Salem, MA 01970
Tel# 1- 800-631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
