The Gotcha
®
is a registered trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products. Part #00INSGO
Parts
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
Instructions For Hanging
Instruction Sheet
Step 1
Place poster on a flat surface. Snap the Gotcha
Holder open and insert poster (top and bottom).
To close, snap the Gotcha Holder shut.
Fig. 1
Note:
It is easier to open and close the Gotcha
Holder by starting at one end and working your
way down the holder.
Step 2
Insert OneUp Gotcha Clips into slot on the
backside of the top Gotcha only. (You should hear
a SNAP" when the clips are inserted properly).
Fig. 2
Note:
For best results, place the clips 1/3 of the
way in from each end on the top Gotcha Holder.
Fig. 3
Step 3
Suspend poster.
Important note:
Please save and reuse the Gotcha Holder and the
OneUp Gotcha Clips for future projects.
OneUp Gotcha Clip
s
Gotcha
®
Gotcha
12G100
Incept-1.12.00
Figure 1
Figure 3
Figure 2
