Parts
Instruction Sheet
Step 1
Assemble bottom holder bracket
onto lower pole section (this is the
thicker section of pole).
Step 2
Screw pole onto baseplate.
Tighten securely.
Step 3
Place stand upright. Using
thumbscrew at top of pole, attach
top holder bracket onto pole top.
Step 4
Insert T-Top Gotcha Holder into
the AnoGotcha Shell.
Step 5
Slide AnoGotcha onto brackets.
Step 6
Install end caps after assembly
to brackets.
EconoStand™
Instructions for Assembly
Incept- 9.10.02
EconoStand
components
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
The Gotcha
®
is a registered trademark and EconoStand
TM
and AnoGotcha™
are tradmarks of Rose Displays, Ltd. Neither the manufacturer nor any sales
agent may be held liable for injury, loss or damage resulting from the use of
these products. Part #02INSEcono/AnoGotcha
1
2
3
4
5
6
Base Plate
Pole
Top
Holder Bracket
Bottom
Holder Bracket
Top
Thumb
Screw
AnoGotcha Shell
12AG400
T-Top Gotcha
Continued on next page
