Screw ball knobs onto threaded rods.
Step 1
AnoGotcha
™
Stand
assembly continued
• Locate four ball knobs and
two threaded rods.
• Screw one ball knob
onto one end of each
threaded rod.
Note:
Do not screw a ball
knob onto both ends
of threaded rods.
AnoGotcha is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any
sales agent may be held liable for injury, loss or damage resulting from the use of these products.
Part #02INSAnoGotchaStand
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
Screw vertical poles onto 9” round bases.
Step 2
• Screw the end of one
vertical pole onto the
threaded stud of each
9” round base.
• Repeat for both poles.
Screw one ball knob on one end of
threaded rod and tighten.
You should have one ball knob on
one end
of each threaded rod.
Screw one vertical pole onto each
9” round base.
Tighten with hands.
You should have two matching vertical poles with bases.
vertical
pole
9” round
base
