Rosco Vision SAFE-T-SCOPE 360, Installation Manual And User'S Manual

Page: 10 / 29

10
Video Harness Detail (STSK360VHAR)
•
Names from this diagram are printed on the side of corresponding cables in STSK360VHAR.
•
CVBS is triggered video output. This output is ONLY active if the system has been triggered.
•
CVBS is a triggered output intended for connection to a monitor. For a list of compatible Rosco monitors, see
Page 27.
•
CVBS-RV can be used for video recording. Rosco DV440 or any other compatible video recorder can be
connected to this output for video recording. This output is not triggered-it is always active.
•
CVBS and CVBS-RV outputs can be connected to either 4-PIN video out (STSH357) OR RCA out (STSH358).
•
“NAVI UART,” “CVBS - BB,” and “SPEAKER” outputs are NOT USED.
Power Harness Detail (STSK360PHAR)