background image

STSK7465

Green wire is the 
reverse trigger wire, 
connect to vehicle 
backup light circuit. 
Monitor will turn on 
when the vehicle shifts 
into reverse

Wiring Diagram

13 Pin Connector

STSC141

STSM254

F

  

M

 

F

  

M

 

Safe-T-Scope

®

  

Backup Camera System                                                                                  

                                                                 STSK7465

6                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                7

4 Pin Connector 

Connect the red wire 
12Vdc to an ignition 
switched accessory 
(ex. radio)
power source 

Summary of Contents for STSK7465













Reviews: