6
Rosco Maximizer 3B Asphalt Distributor
6-25
Operation
2. Set the Plus One Controller Auto/Manual selection
to MANUAL.
3. Set the Plus One Controller Pump Control priority to
FRONT.
4. Set the Plus One Controller Mode Selection control
to TANK CRCLT.
5.
Turn Manual Pump Speed dial in FORWARD
direction and run pump at 50 - 75 GPM to circulate
the asphalt.
Tank Circulate Mode
When heating and transporting material, run the
Maximizer 3B in TANK CRCLT in order to mix and
distribute the material in the tank and to minimize the
loss of heat from the plumbing (
).
Never operate burner when the vehicle
is being loaded or in transit. The flue tubes can
become exposed, causing an explosion inside the
tank, or material being sprayed could ignite.
1. Turn the Plus One Controller Master switch ON to
).
Return to
Last Viewed