6
Rosco Maximizer 2B Asphalt Distributor
6-33
Operation
Handspray Mode (Bar Circulate)
Some operators have found that using the SPRAY/
BAR CRCLT mode (
of the handspray wand SPRAY/BAR CRCLT mode will
also eliminate any setup of material that is still in the
spraybar (Figure 5-2, 4 Spraybar Master switch on the
In-Cab Control Box in Bar Circulate posistion while the
mode is set to Spray/Bar Circulate )
NOTE: This mode significantly reduces the pump
pressure since the 2-Way and 3-Way valves are
open to the spraybar The operator may have to
increase the pumpspeed 25 to 50 GPM (94 62
- 189.25 LPM) to get sufficient pressure to the
wand
Return to
Last Viewed
Return to
Thumb Index
Summary of Contents for Maximizer 2B
Page 2: ......
