Rosco Dual-Vision XC4 Installation Manual Download Page 1

Page: 1 / 10

2010 Chevy/GMC Bus Installation Guide

Version 4.10.2

Proprietary and Confidential 2010 Chevy/GMC Bus

This guide will show the proper way to install a Dual-Vision XC4 Camera in a 2010 Chevy/GMC Bus.

Please review the Installation Guidelines for grounding and making connections prior to installing. In this

guide you will find dash removal, wire locations, & mounting locations.

Verify no vehicle service lights are on prior to installation. Contact a Fleet Manager immediately if the

vehicle has any damage

After testing and verifying power wires, disconnect the negative battery terminal to prevent any

accidental shorts or blown fuses

UPDATED October 15

th,

2018

***NEW PART***

***Harness DV457 is needed if trigger wires are being connected***

For Technical Support please contact our support team at:

[email protected]

Gray

–

Caution

Red

–

Warning

Blue

–

Extra Installation Parts Needed

Purple

–

New Installation

Summary of Contents for Dual-Vision XC4











Search results

Summary of Contents for Dual-Vision XC4

Reviews:

Related manuals for Dual-Vision XC4

Brands by name

Popular brands

Rosco Dual-Vision XC4, Installation Manual

Search results

Summary of Contents for Dual-Vision XC4

Reviews:

Related manuals for Dual-Vision XC4

Brands by name

Popular brands