1 DESCRIPTION
The CE-X, 36:1 is a high performance miniature Color Zoom camera intended for use in
shallow water applications. The CE-X, 36:1 is rated to 70 meters water depth. The camera
has been designed from the outset with an eye towards simple, straightforward operation
and maintenance. All major subassemblies: Rear Endcap, Universal Interface Board with
Long Line amplifier, and Camera Module have been designed such that any part may be
replaced in minutes utilizing only minimal hand tools. Soldering skills are required only for
major repairs or modifications to the camera electronics. In addition to the standard
configuration outlined here, ROS offers variations to the basic CE-X, 36:1. These include:
*
Alternate Housing Materials and Depth Ratings
* Alternate
Connectors
*
Control Using Unipolar or Differential Voltages
*
Remote Control from a Computer Terminal over RS485 link
Due to the many options and variations possible, some areas of this manual may not apply
to a specific camera or application. If your particular CE-X, 36:1 camera is significantly
different from the standard configuration, these details will be described in a manual
addendum. When in doubt, please consult your local representative or ROS for assistance.
The ROS CE-X, 36:1 camera is illustrated by the installation drawings in the appendix. The
camera housing is constructed of hard-anodized aluminum and is designed to be operated
in natural but hostile environments. The front window is made of impact resistant optical
grade acrylic and utilizes a single O-ring seal. The external connector on the standard
camera is an Impulse Enterprise Model LPMBH-6-MP. Other connectors available are
listed within this manual.
The CE-X, 36:1 camera utilizes a high resolution, EXview HAD (Hole Accumulation Diode)
image sensor coupled to a miniature 36:1 zoom lens in order to provide high-resolution
video under widely varying and adverse viewing conditions. Scene illumination and White
Balance correction is completely automatic. Auto-Focus and Auto-Exposure operation is
enabled upon power-up, but these may be overridden at any time with manual inputs if
operating conditions warrant.
The basic CE-X, 36:1 camera is capable of providing video outputs in both composite
(NTSC or PAL). All output video lines are buffered and fused to prevent accidental damage
to the camera electronics in the event of improper connection. In addition, differential output
mode may be selected for use with balanced shielded twisted pair cables.
All of the available modes of operation can be selected using compact switches located on
a Mode Select Board. This board is fully accessible when the camera is removed from the
pressure housing. No jumper installation or soldering is required to select the modes of
operation.
51-17568 REV B
1
Summary of Contents for CE-X-36
Page 15: ...51 17568 REV B 9...
