Ropox 40-45027, User Manual

Page: 28 / 30

TF 200.06.0006_ENG
28
7.1 Periodic maintenance
Component Maintenance activity Maintenance interval Registration date of
maintenence
Geberit Sigma 12
cistern Descaling / change of
worn components 6-12 months dependent
on calcium content in
water
7.2 Calibration of actuator
Actoruator(s) are aligned and calibrated from the factory. In case they need calibration to run
simultaneously use the following procedure.
Press and hold both UP and DOWN on the hand control (▲▼) until the control unit has beeped approx.
ten times. Then adjust the product to the bottom position by pressing DOWN on the hand control until
movement of both columns are in the lowest possible position.
8.
Components part list
Notification!
Ropox will make parts list and circuit diagrams available for extraordinary maintenance
and repair beyond what is described in this manual. Repair beyond what is described in
this manual may only be done by Ropox designated service personnel.
9.
Environmental protection
The product is not intended to be disposed as municipal waste. Proper disassembly, sorting and
disposal of components must be done by waste disposal professionals.
Part Disposal recommendation
Frame Steel
Cistern Hard plastic
Polystyrene
Covers Hard plastic (ABS/PMMA)
Height adjustable toilet support arms Steel