Ropox 40-44000, User Manual

Page: 38 / 42

Page 38
© ROPOX 2017
11. Service and maintenance
11.1 Cleaning
During use, the product may get dirty. It is very important to clean the product as described in
these instructions.
Wipe Ropox Support Washbasin with a wrung cloth with lukewarm water and a mild detergent. Do
not use enchants, abrasives or grinding cloths, brushes and sponges.
11.2 Cleaning of tabletop and washbasin
Ropox Support Washbasin is made of a composite material of marble and plastic granulate with a
gel coat surface. This gives a hard and very hardwearing finish, which is easy to clean. Wash the
surfaces daily with water and dry with a cloth. Do not use detergents containing hard abrasives
–
e.g. steel wool, scouring powder or sulphuric acid.
If the water has high calcium content, calcareous deposits will often occur. These deposits should
be removed at least once a week by using a detergent containing citric acid, acetic acid or
phosphoric acid. Leave the detergent to work for 5 to 10 minutes depending on the thickness of
the deposits and clean thoroughly with a soft scouring sponge.
Disinfection of the basin may be done with household spirits.
11.3 Inspection
The frame of Ropox Support Washbasin is maintenance-free. Moving parts have been lubricated
for life. For reasons of safety and reliability, we recommend inspection of the frame once a year.
Annual inspection:
➢
Check that all bolts and screw have been securely tightened.
➢
Check that the frame moves freely and without problems from bottom to top position.
➢
Check that water hoses and drain hoses are tight and functional.
After each inspection, complete the service schedule. See Section 11.5.
Only use Ropox original spare parts for replacement. If other spare parts are used, the
whole guarantee may become void.
Inspections, service and repairs must be carried out by competent
personnel