Unit functions
Page 36
RESM-5
returns to the home position if you press the "ENTER"
key again or at the latest after 30s.
9.16
Diagnostic interface / visualization
software
An interface with a 6-pole Western socket is provided
for system diagnostics and process visualization. This
interface allows a data connection to be set up to the
ROPEX visualization software using the ROPEX
CI-USB-1 communication interface.
Only a ROPEX communication interface is
allowed to be connected to the diagnostic
interface. Connecting another device (e.g. a
telephone cable) could damage the unit and result
in malfunctions.
The ROPEX visualization software is described in a
separate document.
9.17
System monitoring / alarm output
To increase operational safety and avoid faulty
heatsealing, the RESISTRON monitoring device
incorporates special hardware and software features
that facilitate selective error detection and diagnosis.
Both the external wiring and the internal system are
monitored.
These features assist the operator in identifying the
cause of abnormal conditions.
A system fault is reported or differentiated by means of
the following indications.
A.)
Error code on the display:
The cause of a fault can be localized quickly and easily
with the help of the error code that appears on the
display. Please refer to section 9.18 "Error messages"
on page 37 for a list of the possible error codes.
0
5
1 2
3
4
6
7
8
9
DI
AG
!