background image

Customer Services, Roper Rhodes Ltd, Brassmill Lane Trading Estate, Bath, BA1 3JF

Tel:01225 303 900 | Fax: 01225 448 877

Email: [email protected] | Web: www.roperrhodes.co.uk

BEFORE YOU START

HAMPTON

CLOAKROOM UNIT / HAM450B

Please retain for future use

pilot holes

block of wood

It is recommended that the unit and basin are secured to a suitably reinforced wall to ensure stability. This can be done through the back 
rail (fixings not included.)

RR-HAMCLK    REV : JH/08/2016

Figure 2

Figure 1

FITTING HANDLES

• A pilot hole located at the back of the door can be drilled if 

using a single screw knob.

• If you have chosen a pull handle with 2 screws then please 

pilot and then drill through the door with the handles in the 
desired location. 

• Carefully drill any holes  using a clamped block of wood to 

protect the front of door - See figure 1. 

• The handles can simply be screwed into place using the 

screws supplied.

• If you choose third party handles please measure carefully 

before drilling.

FITTING CERAMIC BASIN

• Apply a layer of silicone sealant to the basin on all 4 sides to 
be fixed to the panels, back rail and front section as per figure 2. 

• The basin should be held in place while the silicone cures.

Recommended
position for handle

Recommended
for knob (pilot
hole included)

Recommended
position for self

adhesive nameplate

Reviews: