ROPA Tiger 6, Original Operating Manual

Page: 68 / 564

Operating Components
Driver’s seat
68 / 564
Headrest
The headrest can be individually adjusted
for height by pulling it upward over the
various increments up the end stop.
By pushing forward or backward the
angle of the headrest can be adjusted
individually.
To remove the headrest, pull it over the
end stop.
Lumbar support
Pressing the top and bottom switch
adjusts the lumbar support in the top and
bottom area of the seatback cushion.
This increases both the seating comfort
and the performance of the driver.
The lumbar support is adjusted outwards
by pr and inwards by pressing -
on the switch.
If the seatback cushion no longer moves
when + is pressed on the switch, the
maximum position has been reached and
the switch must be released.
Seat heating and cooling
The active seat air conditioning ensures
that the seat surface is always dry. Body
moisture in the contact area of the seat is
removed. This keeps the seat comfortably
cool and dry.
Seat heating and cooling is switch on and
off by pressing the switch.
0 = seat heating and cooling OFF
1 = seat heating ON (seat cooling OFF)
2 = seat air cooling ON (seat heating
OFF)