ROPA Tiger 6 Original Operating Manual Download Page 390

Page: 390 / 564

Maintenance and Service

Hydraulic system

390 / 564

Pressure reservoir brake system

Regularly check the hoses of the hydraulic system for aging and damage!
Immediately exchange damaged or aged hoses. Only use hoses for replacements

conforming to the specifications of the original hose!
For cost reasons we recommend ordering replacement hoses directly from ROPA,

because original ROPA hydraulic hoses are generally significantly more economical

than competitive products.

(1)

Hydraulic oil cooler

(2)

Oil cooler pump distributor gears

The fan drive of the hydraulic oil cooler automatically reverses at regular intervals. So

that soiling is removed to a great extent independently. Manual reversing is also possi-

ble (

See Page 338

). Consider that a soiled cooler achieves a clearly reduced cooling

performance. This substantially lowers the load bearing capacity of the machine and

therefore the lifting performance. If the hydraulic fluid gets too hot, then switch off the

engine and try to determine the cause. Usually, the hydraulic fluid cooler is soiled.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tiger 6

Reviews:

ROPA Tiger 6, Original Operating Manual, Page: 390 / 564

Search results

Summary of Contents for Tiger 6

Reviews: