ROPA Tiger 6, Original Operating Manual

Page: 298 / 564

Operation
Strainer wheels (turbines)
298 / 564
6.16.1 Setting the strainer wheel rotational speed
The rotational speed of the strainer wheels must be individually adjusted to the
respective operating conditions. Readjustment may be necessary several times during
the lifting process. Set the speed so that the beet does not jam at the strainer wheels,
but is still mostly cleaned. To avoid undesired damage to the beet, you should set the
rotation speed of the strainer wheels only so high that an even flow of beet is ensured.
If the rotation speed of the strainer wheels is too high, then the beet is damaged. This
causes value loses of the beet.
Rpm strainer wheels
Choose this function with R-Select.
+ Key = strainer wheels faster
- Key = strainer wheels slower
The preselected rotational speed of the strainer wheels 1, 2 and 3 may be read in the
display area Cleaning path ( 1 ), ( 2 ), ( 3 ) and displayed selection field ( 4 ).
2
1
3