ROPA Tiger 6 Original Operating Manual Download Page 294

Page: 294 / 564

Operation

Infeed conveyor

294 / 564

6.15.4

Setting infeed conveyor – distance settings

In case of beet losses at the transition lifting roller/infeed conveyor/1st strainer wheel,

the front and rear distance of the infeed conveyor must be set as described below.

6.15.4.1

Setting infeed conveyor distance longitudinally

The distance between conveyor and the last lifting roller can be set in front at the lifter

on the left and right by turning the stop bolt (

) and self-locking nuts (

). To achieve

good soil separation and easy passage of foreign objects, the distance should always

be set as large as possible.

ATTENTION

Danger of machine damage.

Make sure that the conveyor in no case touches the lifting roller. This might cause

severe damage to the conveyor.

Summary of Contents for Tiger 6





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands

ROPA Tiger 6, Original Operating Manual

Search results

Summary of Contents for Tiger 6

Reviews:

Related manuals for Tiger 6

Brands by name

Popular brands