ROPA KS 475, Translation Of The Original Operating Manual

Page: 96 / 110

Lists/Tables/Plans/Diagrams/Maintenance Verification
Lubricating plan (lubrication with grease gun)
9.3 Lubricating plan (lubrication with grease gun)
KS 475
Lubricating point Number of
nipples
every oper.
hours
Cardan shaft tractor to angular gear
see attached manual of the
cardan shaft manufacturer
Freewheel cardan shaft above topper shaft 1 8
Knuckle joints cardan shaft above topper shaft 4 8
Profile tube cardan shaft above topper shaft none annually
Bearing cardan shaft above topper shaft 1 8
Bearing top V-belt pulley 1 8
Bearing topper shaft right and left 2 8
KS 490
Lubricating point Number of
nipples
every oper.
hours
Cardan shaft tractor to angular gear
see attached manual of the
cardan shaft manufacturer
Freewheel cardan shafts above topper shaft 2 8
Knuckle joints cardan shafts above topper shaft 8 8
Profile tubes cardan shafts above topper shaft none annually
Bearing cardan shafts above topper shaft 2 8
Bearing upper V-belt pulleys 2 8
Bearing topper shaft right, left and central 4 8
ADVICE
All lubricating points must also be lubricated after each washing of the machine.
Grease ROPA item no. 435006200
as per DIN 51825, NLGI-class 2, type: KP2K-20,
at low outdoor temperatures KP2K-30.
No lubricating greases containing solid lubricants may be employed. Biologically
degradable greases are also admissible.
96 / 110