ROOTECH ACCURA 7500, User Manual, Page: 59 / 76

Page 59
Value Table
T1 : Date † (UINT32)
Value Bits to Use Descriptions
1
st
16 bits Year (YYYY / xx / xx)
0xFFFF bit15 – bit0 2000 to 2200 in step of 1
2
nd
16 bits Month / Day (xxxx / MM / DD )
0xFF00 bit15 – bit8 Month (1=January, 2=February, … , 12=December
0x00FF Bit7 – bit0 Day (1 to 31 in step of 1)
† If the date has never been set, the value for all 32 bits will be 1.
T2 : Time † (UINT32)
Value Bits to Use Descriptions
1 st 16bits Hours / Minutes (HH : MM : xx.xxx) -
0xFF00 bit15 – bit8 Hours (0=12am, 1=1am, … ., 12=12pm, … ., 23=11pm
0x00FF Bit7 – bit0 Minutes (0 to 59 in step of 1)
2 nd 16bits Seconds (xx : xx : SS.SS)
0xFFFF bit15 – bit0 (0=00.00s, 1=00.01s, … ., 5999=59.99s)
†
If the time has never been set, the value for all 32 bits will be 1.
T3 : Event Type †
Value Bits to Use Descriptions
0xF000 Bit.[15:12] Event Type
1 General
2 Pickup
3 Trip
4 T & A (Trip & Alarm)
5 Alarm
6 Dropout
7 DI Input (Logic Input)
8 Self-Test Warning
9 Setup item changed
The format for the remainder of the register depends upon the event type
General Event Type
0x00FF Bit.[7: 0] Causes of Events
1 CB Opened
2 CB Closed
3 Power Reset
4 Open CB
5 Close CB
6 Set Time & Date
7 Maximum Fundamental Value Reset
8 Event Record Reset