ROOTECH ACCURA 7500, User Manual, Page: 43 / 76

Page 43
Auxiliary Function 2 Setup section
Address Attribute Measurement Format Descriptions
PT Failure Detection Function
43031
R/W PT Failure Function UINT16 0x0000 = Disable
0x0001 = Control
0x0002 = Control & Alarm
43032 R/W PT Failure Aux. Relay UINT16 Refer to “Value Table T10”
43033 R/W PT Failure Time Delay UINT16 0 - 100 / 1 sec
43034 R/W PT Failure UVR Blocking UINT16 0x0000 = N (Disable)
0x0001 = Y (Enable)
43035 R/W PT Failure Detection according to Phase
Sequence UINT16 0x0000 = ABC
0x0001 = ACB
43036 R/W PT Failure Function Save Request
(Save Address : 43031 - 43035) UINT16 0x00FF = Save Request
0x0000 = Do Not Save
CB Failure Detection Function
43037 R/W CB Failure Function UINT16 0x0000 = Disable
0x0001 = Control
0x0002 = Control & Alarm
43038 R/W CB Failure Aux. Relay UINT16 Refer to “Value Table T10”
43039 R/W CB Failure Current Tap S1 UINT16 0.1 - 10.0 / 0.1 A
43040 R/W CB Failure Time Delay S1 UINT16 0.1 - 10.0 / 0.1 sec
43041 R/W CB Failure Function Save Request
(Save Address : 43037 - 43040) UINT16 0x00FF = Save Request
0x0000 = Do Not Save
Protection Block Function
43042
R/W Protection Block Function UINT16 0x0000 = N (Disable)
0x0001 = Y (Enable)
43043 R/W Protection Block Aux. Relay UINT16 Refer to “Value Table T10”
43044 R/W Protection Block Operation Time S1 UINT16 0.1 - 60.0 / 0.1 sec
43045 R/W Protection Block Inst. OCR UINT16 0x0000 = N (Disable)
0x0001 = Y (Enable)
43046 R/W Protection Block Inst. OCGR UINT16 0x0000 = N (Disable)
0x0001 = Y (Enable)
43047 R/W Protection Block Time OCR UINT16 100 - 600 / 1 %
43048 R/W Protection Block Time OCGR UINT16 100 - 600 / 1 %
43049 R/W Protection Block Save Request
(Save Address : 43042 - 43048) UINT16 0x00FF = Save Request
0x0000 = Do Not Save
43050
Invalid UINT16