Accura 2350-IDC User Guide
Chapter 3 Accura 2300[S] Operation/Setup
ⓒ
2014 Rootech Inc. All Rights Reserved
Page 25
Fig 3.5 DO Operation Setup in the Setup Mode of Accura 2300[S]
Setup Mode of Accura 2300[S]
Setting the Accura 2350-IDC module via the LCD screen of Accura 2300[S] is not supported. Users can
set up Accura 2350-IDC module via Modbus communication. Refer to
「
Accura 2300[S]/2350
Communication User Guide
」
for details.
Event Log Mode of Accura 2300[S]
Details of the events that occurred in the IDC module can be checked on the Event Log screen of Accura
2300[S]. Each event consists of start and end events.
Fig 3.6 Start Event of Over Event
End Event of Over Event
Fig 3.7 Start Event of Under Event
End Event of Under Event
1st row
Displays the event number
2nd row
Displays the IDC module and the channel where the event occurs
3rd row
Displays
“
Over
”
event /
“
Under
”
event and start / end event
4th row
Start event: measured current when a start event is detected [mA]
End event: maximum current during the Over event [mA]
minimum current during the Under event [mA]
Summary of Contents for Accura 2350-IDC
Page 1: ......
