Chapter 3 Accura 2300[S] Operation/Setup
Accura 2350-DO User Guide
Page 22
ⓒ
2018 Rootech Inc. All Rights Reserved
Chapter 3 Accura 2300[S] Operation/Setup
Users can perform the following functions with the buttons (</ESC,
∧
/SETUP,
∨
/EVENT, >/ENTER) on the
front of the Accura 2300[S] device. Accura 2300 and Accura 2300S operate in the same way when working
with the Accura 2350-DO module. However, the display segments of Accura 2300 are slightly different
from those of Accura 2300S.
Mode
Description
Display mode
Displays the measured values of the selected Accura 2350 module ID
Setup mode
Supports setup for various parameters of Accura 2300[S]/2350 (network, connection,
PT, communication, event, etc.)
Event log mode
Displays event logs such as Dip and Swell events
Note
The SETUP LED remains On in the setup mode.
Display Mode of Accura 2300[S]
On the Accura 2300[S] display screen, users can check the contact status of the DO module by pressing
the Right(>) button to move to the MODULE column (or pressing the Left(<) button move to the opposite
direction). The screen displays the status data of four channel at once. The DO module has 8 DO channels,
thus data on all DO channels are shown on two screens.
Fig 3.1 Display Screen of the DO Module showing the Status of Channels 1,2,3,4 / 5,6,7,8
Setup for Accura 2350-DO module can be performed via Modbus communication. It is impossible to set
up Accura 2350-DO module with the buttons on Accura 2300[S]. Refer to
「
Accura 2300[S]/2350
Communication User Guide
」
for details.
Accura 2350-DO module has no event parameters. Thus, Accura 2300[S] does not support event setup for
the DO module.
