Xiamen Rongta Technology Co., Ltd.
www.rongtatech.com
9
Notice:
(1)
Firstly, insert the power supply plug DC12V of printer; then connect the
AC220V power; lastly, turn on the switch. Please operate it by the
instruction steps; otherwise, it would damage the printer.
(2) Use unsuitable power adapter would cause the bad print result; even
though may cause the breakdown of printer.
(3) Do not connect the telephone line to the interface of cash drawer;
because it may result the damage for printer and telephone.
(4) Do not pull the power soft wire when unplugging, if the user does it by
force may result the breakdown of the printer and power adapter.
4.3
、
Load the Paper Roll
Model: RP58 printer use 58mm width thermal paper, which with easy paper
loading. The loading instruction is listed at below:
（
1
）
Open the top cover of printer.
（
2
）
Loading the paper roll as following picture. (Left is correct; right is wrong).
（
3
）
Pull a part of paper out of the paper trough and then close the top cover.
（
4
）
Use the cutter of printer to tear off the extra paper.
4.4
、
Power Switch, Keystroke and Indicator Light
4.4.1 Power Switch
S
witch is for turning on/off the power supply of printer which is located right
ahead of it. When pressing “-” is turn on the printer and pressing “O” is turn off.
Notice:
Do not turn on the switch unless the user connects the power supply.
4.4.2 Keystroke and Indicator Light
Keystroke and indicator board is listed as below
：
Summary of Contents for RP58
Page 1: ...RP58 USER MANUAL...
