Using PEEDI
Argument:
#CORE
- core number of desired core to be current
Example:
core
core #1
clock
Syntax:
clock init|normal|kHz
Description:
Switch JTAG/BDM target clock - init, normal or any desired frequency. This is useful
when the INIT section is too long and takes too much time. Using this command, you
can initialize in the beginning the system clock (the PLL) and then switch to normal
clock. This will allow much faster execution of the INIT section.
Argument:
init, normal or frequency in kHz
- JTAG/BDM clock
Example:
core
core #1
run
Syntax:
run #SCRIPT_NUMBER|$SCRIPT_NAME|SCRIPT_FILE
Description:
Execute script from the target configuration file or a file containing CLI commands.
Argument:
PEEDI User’s Manual
110
