Ronetix PEEDI, User Manual

Page: 105 / 176

Using PEEDI
3.15.1 File path convention
PEEDI can get files from local EEPROM and MMC/SD card or TFTP, FTP and HTTP server. It can
store files on all the previous locations except HTTP server. However the download speed from
HTTP and FTP servers is times faster than TFTP servers. FAT12, FAT16 and FA32 formatted
MMC/SD cards are supported but there is no support for long file names, so all files should be
named using the 8+3 DOS name convention or using names up to twelve characters.
This file path syntax can be used to point the desired location:
Note :
If the file path is skipped the per-core default path will be used. The default core’s path
is defined in the target configuration file using the COREn_PATH parameter. Full path
will be used in the entire manual for clear understanding.
Note :
If the IP address is skipped the default server IP will be used. The default server IP can
be set using the fconfig RedBoot command. Full path will be used in the entire manual
for clear understanding.
TFTP server 192.168.1.1 will be requested for /subdirectory/file:
tftp://192.168.1.1/subdirectory/file
TFTP default server IP will be requested for /subdirectory/file
tftp:/subdirectory/file
FTP server 192.168.1.1 will be requested for subdirectory/file from the current working directory
right after the login of user with password:
ftp://user:password@192.168.1.1/subdirectory/file
FTP server 192.168.1.1 will be requested for subdirectory/file from server root directory using user
and password credentials to login:
PEEDI User’s Manual
105 www.ronetix.at