Preparing for Use
R&S
®
TSMA6B-BP
12
Getting Started 4900.9060.02 ─ 01
NOTE
: Customer must provide country-specific power supply cable for
IEC60320 / C6 socket.
– R&S TSMA6-BC4,
R&S No.
3630.7708.02
4-bay charger for R&S
TSMA6B-BP batteries
●
Collar screws (as a spare part) (R&S No. 4900.0804.00)
To power TSMEx devices (scanner, downconverter), the following accessory
cables are necessary.
●
R&S TSMA6-BPPT (single TSMEx power cable, R&S No.
4900.1730.02)
●
R&S TSMA6-BP2T (dual TSMEx power cable, R&S No.
4901.0566.02)
4.2
Connecting with External Power Supply
Risk of instrument damage during operation
Read and observe the "Safety Instruction for rechargeable Li-Ion batteries"
delivered as a printed brochure with the instrument.
The DC power supply connector is on the rear panel. It has a wide range DC
input voltage from 11
V to 28
V.
Figure 4-2: DC power supply connector
●
DC power supply via cigarette lighter using the accessory DC power cable
●
DC power supply from a vehicle terminal block with a modified DC power
cable
Demount the cigarette lighter adapter from the supplied power cable and con-
nect the open ends of the cable to the proprietary power supply. Be sure to
respect the correct polarity.
Connecting with External Power Supply
