Ronde & Schwarz NRX, Getting Started

Page: 24 / 27

Instrument Tour
R&S
®
NRX
24 Getting Started 1424.7070.02 ─ 05
By default, both connectors are disabled.
5.2.2 Ethernet Interface
See (2) in Figure 5-2 .
The Ethernet connector is an RJ45 socket for remote controlling the R&S NRX
via a network.
5.2.3 USB Device Interface
See (3) in Figure 5-2 .
USB 2.0 (universal serial bus) interface of the type B (receptacle). Used to con-
nect the R&S NRX to a computer for USB remote control.
5.2.4 USB Host Interface
See (4) in Figure 5-2 .
See Chapter 5.1.5, "USB Host Interface" , on page 21.
5.2.5 AC Supply and Power Switch
See (5) in Figure 5-2 .
When the R&S NRX is connected to the AC supply, it automatically sets itself to
the correct range for the applied voltage. The range is printed on the type label.
There is no need to set the voltage manually.
For more details, see Chapter 4.6, "Connecting to the AC Power Supply" ,
on page 13.
5.2.6 IEC 625/IEEE 488 Interface
See (6) in Figure 5-2 .
Requires GPIB/IEEE488 interface (R&S NRX-B8).
Rear Panel Tour