Overview
Overview of the Front
25
CLIPSTER | Hardware Guide | Hardware Generation V+
Rohde & Schwarz DVS GmbH
SSD LEDs
The SSD LEDs show the statuses (activities) of the SSD disks of
the disk array. They can be seen only when they are flashing
because they are located behind the white strip and thus not
visible when off.
SSD LEDs
Each LED represents a SSD disk of the array:
8
reset
Resets your system and initiates a
warm reboot. Use a thin, pointed
object to press this button.
9
mute
In case of a hardware malfunction a
system alarm turns on. By pressing
this button the alarm buzzer can be
switched mute. Use a thin, pointed
object to press this button.
Data Loss
Save your data before resetting the system.
Some alarms (e.g. the one in case of a SSD disk failure)
are independent of the system alarm and cannot be
switched mute with the mute button.
Operation items
No. Item
Explanation