manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 966

Remote Commands

R&S

®

FPL1000

966

User Manual 1178.3370.02 ─ 11

ON | 1

The function is not available and the display is not updated dur-
ing remote operation.
*RST: 

0

SYSTem:DISPlay:UPDate 

<State>

This command turns the display during remote operation on and off.

If on, the R&S

 

FPL1000 updates the diagrams, traces and display fields only.

The best performance is obtained if the display is off during remote control operation.

Parameters:

<State>

ON | OFF | 1 | 0
*RST: 

0

Example: 

SYST:DISP:UPD ON

Manual operation: 

See 

"Remote Display Update"

 

on page 570

SYSTem:ERRor:DISPlay 

<State>

This command the error display during remote operation on and off.

If activated, the R&S

 

FPL1000 displays a message box at the bottom of the screen that

contains the most recent type of error and the command that caused the error.

Parameters:

<State>

ON | OFF | 1 | 0
*RST: 

0

Example: 

SYST:ERR:DISP ON

Manual operation: 

See 

"Display Remote Errors"

 

on page 570

SYSTem:IDENtify:FACTory

This command resets the query to 

*IDN?

 to its default value.

Manual operation: 

See 

"Reset to Factory String"

 

on page 569

SYSTem:IDENtify[:STRing] 

<String>

This command defines the response to 

*IDN?

.

Parameters:

<String>

String containing the description of the instrument.

Manual operation: 

See 

"Identification String"

 

on page 569

Configuring the R&S

 

FPL1000

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands