manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 939

Remote Commands

R&S

®

FPL1000

939

User Manual 1178.3370.02 ─ 11

Manual operation: 

See 

" Report Append"

 

on page 504

HCOPy:TREPort:DESCription 

<Description>

This command defines the description of the test report as shown on its title page.

Parameters:

<Description>

String containing the description of the test report.

Example: 

HCOP:TREP:DESC 'A short summary of the test
report.'

Adds a description to the test report.

HCOPy:TREPort:ITEM:DEFault

This command restores the default configuration of the test report regarding the infor-
mation that is part of the report.

It also restores the default names of the measurement information titles.

Example: 

HCOP:TREP:ITEM:DEF

Restores the default test report configuration.

Usage: 

Event

Manual operation: 

See 

"Default"

 

on page 503

HCOPy:TREPort:ITEM:HEADer:LINE<line>:CONTrol 

<Repetition>

This command selects how often the items in the report header are displayed in the
document.

Suffix: 

<line>

.

1...6
Selects the header line.

Parameters:

<Repetition>

GLOBal

The selected header line is displayed at the top of every page of
the report.

NEVer

The selected header line is displayed on no page of the report.
Note that a line that does not contain anything is still displayed in
the report as a blank line. If you select NEVer, the line is not dis-
played at all.

SECTion

The selected header line is displayed after the title of every sub-
report.
*RST: 

NEVer

Managing Settings and Results

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands