manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 67

Getting Started

R&S

®

FPL1000

67

User Manual 1178.3370.02 ─ 11

4.4.1.5

 

Instrument and Status Information

Global instrument settings and functions, the instrument status and any irregularities
are indicated in the status bar beneath the diagram.

In the MultiView tab, the status bar always displays the information for the currently
selected measurement.

The following information is displayed:

Instrument status

The instrument is configured for operation with an external reference.

Battery loading status

Date and time

The date and time settings of the instrument are displayed in the status bar.

Error messages

If errors or irregularities are detected, a keyword and an error message, if available,
are displayed in the status bar.

4.4.1.6

 

Error Information

If errors or irregularities are detected, a keyword and an error message, if available,
are displayed in the status bar.

Depending on the type of message, the status message is indicated in varying colors.

Table 4-8: Status bar information - color coding

Color

Type

Description

Red

Error

An error occurred at the start or during a measurement, e.g. due to missing
data or wrong settings, so that the measurement cannot be started or com-
pleted correctly.

Orange

Warning

An irregular situation occurred during measurement, e.g. the settings no lon-
ger match the displayed results, or the connection to an external device was
interrupted temporarily.

Gray

Information

Information on the status of individual processing steps.

Operating the Instrument

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands