General Instrument Setup
R&S
®
FPL1000
539
User Manual 1178.3370.02 ─ 11
8.7.3
Reference: Transducer Factor File Format
Transducer factor data can be exported to a file in ASCII (CSV) format for further eval-
uation in other applications. Transducer factors stored in the specified ASCII (CSV) for-
mat can also be imported to the R&S
FPL1000 for other measurements.
For more information about transducer factors, see
This reference describes in detail the format of the export/import files for transducer
factors. Note that the
bold
data is
mandatory
, all other data is optional.
Different language versions of evaluation programs may require a different handling of
the decimal point. Thus, you can define the decimal separator to be used (see
Table 8-1: ASCII file format for transducer factor files
File contents
Description
Header data
sep=;
Separator for individual values (required by Microsoft Excel, for
example)
Type
;RS_TransducerFactor;
Type of data
FileFormatVersion
;1.00;
File format version
Date;01.Oct 2006;
Date of data set storage
OptionID;SpectrumAnalyzer
Application the transducer factor was created for
Name;
TestTDF1
Transducer factor name
Comment;Transducer for device A
Description of transducer factor
XAxisScaling;LINEAR
Scaling of x-axis linear (LIN) or logarithmic (LOG)
YAxisUnit;LEVEL_DB
Unit of y values
YAxisScaleMode;ABSOLUTE
Scaling of y-axis (absolute or relative)
NoOfPoints
;5
Number of points the line is defined by
Data section for individual data points
100000000;-50.000000
x- and y-values of each data point defining the line
500000000;-30.000000
1000000000;0.000000
1500000000;-30.000000
2500000000;-50.000000
8.7.4
How to Configure the Transducer
Configuring the transducer is very similar to configuring transducer factors.
The transducer settings are defined in the "Transducer" dialog box which is displayed
when you press the [Setup] key and then select "Transducer".
Transducers
