Ronde & Schwarz 1304.0004K03, User Manual

Page: 496 / 1071

Data Management
R&S
®
FPL1000
496 User Manual 1178.3370.02 ─ 11
Remote command:
HCOPy:DEVice:LANGuage<1|2>
on page 929
Use Screen Colors
Enables or disables the use of printer-friendly color schemes (as opposed to the colors
used on the screen).
Remote command:
HCOPy:TREPort:PCOLors[:STATe]
on page 945
Date
Adds the current date to each page of the report.
Remote command:
HCOPy:TREPort:TDSTamp[:STATe]
on page 945
Page Count
Adds page numbers to each page of the report.
Remote command:
HCOPy:TREPort:PAGecount:STATe
on page 945
Report Path
Defines the name of the report and the location where the report file is to be saved.
Enter the path and filename in the input field, or select the directory using the "..." but-
ton.
If you omit the path, the report is saved in the default directory (C:\Users\Public\Docu-
ments\Rohde-Schwarz\Analyzer\user).
Note : This path defines the location of the actual test report. Templates are stored in a
different location (see "Save" on page 503).
Remote command:
MMEMory:NAME
on page 915
Suppress Dialog ← Report Path
By default, when you store a report, a dialog is displayed to define the storage path.
If the dialog is suppressed, reports are saved to the default directory (C:\Users\Public
\Documents\Rohde-Schwarz\Analyzer\user) with a generic name without further inter-
action.
Raw Data Storage
Defines the location where the measurement data sets for the report are stored until
the report is created.
Enter the path and filename in the input field, or select the directory using the "..." but-
ton.
Remote command:
MMEMory:RAW
on page 947
Working with Test Reports